All "newer" style units have the drain on front of unit.

This used autoclave was in excellent condition when received, nevertheless it has been completely reconditioned and tested by a certified biomed.

MANUFACTURERS DESCRIPTION:

MIDMARK Ritter M7 SpeedClave® Self Contained Sterilizer is the answer for easier, cleaner, more efficient and environmentally friendly sterilization. 19"L x 14"W x 13"H, 30 lbs. Countertop area minimum depth 16.5".

The speedy M7 is the perfect choice for anyone looking for an effective, manual autoclave... at an unbelievably low price. It sterilizes both wrapped and unwrapped instruments, linen packs and glassware. From a cold start, unwrapped instruments take only 9 minutes... starting hot, it’s just 6 minutes! The M7, the "workhorse of sterilizers", is an investment that will last... and last.

It offers simple three-prong, plug-in operation for standard electrical outlets. No plumbing is required as the Ritter M7 has its own reservoir for distilled or de-mineralized water. With our front draining feature, it’s easy to clean and maintain. And all controls and information are on the front and easily accessible to the operator. Three corrosion-resistant, stainless steel trays are standard, which means you’ll probably never have to buy another tray. Low water cutout switch prevents "dry burning". The Ritter M7 will operate only when there is enough water present. This prolongs the life of the heating element.

Reset button saves time. It restores operation after the cutout switch is tripped and you have added water. The cycle timer regulates steam time from 0 to 30 minutes and automatically turns the Ritter M7 off when the sterilization cycle is complete. This prevents over-sterilization, which can reduce the service life of your instruments.

A safety door protects the operator. It automatically seals when pressurized and will not allow the operator to open the door until the chamber is safely depressurized. The temperature regulator allows the operator to preset the temperature at a desired setting between 250°F (121°C) and 270°F (132°C). This control, acting as a thermostat, cycles the heating element on and off. A temperature gauge indicates the temperature inside the chamber. The gauge is graduated from 80°F (26.7°C) to 270°F (132°C).

A pilot light is on when the heater is on. It cycles off and on during normal cycle.

Specifications:
Overall length: 18.12" (46 cm)
Overall width: 13.56" (34.4 cm)
Overall height: 12.81" (32.5 cm)

Countertop area:
Minimum depth: 16.5" (41.9 cm)

Chamber:
7.5" diameter (19.1 cm)
15" depth (38.1 cm)
2.4 gal. usable volume (9.0 liters)

Water reservoir capacity:
1.31 gal. (4.9 liters)

Trays:
One large - 12" L x 5.62" W x .88" D (30.5 x 14.3 x 2.2 cm)
One small - 12" L x 4.12" W x .88" D (30.5 x 10.5 x 2.2 cm)

Unit weight:
30 lbs. (13.6 kg)

Electrical
120 VAC, 60 Hz, 10 AMPS
120 VAC has 1136-watt tubular immersion heater
UL & CUL Listed
CSA Certified
220-240 VAC, 50 Hz, 5 AMPS
100 VAC, 60 Hz, 12 AMPS

Installation
Use on laminate, stainless steel or stone surfaces. Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill the reservoir and for cooling processed trays.

Click on pictures to enlarge.